Switch (Discrete Input) Alarm (2.8.3.) - Siemens SITRANS LUT400 Operating Instructions Manual

Low Level Value OFF (2.8.2.3.)
Sets the material level (defined in Units (2.1.1.) (Page 168)) at which the Low Level Alarm
will de-activate.
Values
Assigned Relay (2.8.2.4.)
Determines which relay (if any) will be activated when the Low Level Alarm activates.
Options
Alarm State (2.8.2.5.)
Read only. Used to view the current state of the Low Level Alarm.
Options
9.2.8.3

Switch (Discrete Input) Alarm (2.8.3.)

Reported when Discrete Input (Discrete Input Number (2.8.3.2.) (Page 198)) is in a
predefined state (Discrete Input State (2.8.3.3.) (Page 199)).
Enable (2.8.3.1.)
Enables/disables Switch Alarm.
Options
Discrete Input Number (2.8.3.2.)
Determines which discrete input to monitor for Switch Alarm.
Options
198
Range: 0.000 to 99999.000
Default: 0.000
*
ACTIVE
INACTIVE
*
*
Operating Instructions, 07/2019, A5E33329501-AC
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ENABLED
DISABLED
DISCRETE INPUT 1
DISCRETE INPUT 2
SITRANS LUT400