Discrete Inputs (3.4.2.); Pump Activations (3.4.3.) - Siemens SITRANS LUT400 Operating Instructions Manual

Ramp (3.4.1.3.)
Enables/disables ramped simulation.
Options
Ramp Rate (3.4.1.4.)
Sets the rate at which the simulated level will change in a ramp simulation.
Options
Low Calibration Point to High Calibration Point
1)
9.3.4.2

Discrete Inputs (3.4.2.)

Simulates behaviour of external contacts connected to a discrete input.
Discrete Input 1 (3.4.2.1.)
Disables simulation of Discrete Input 1, or sets behaviour of DI during simulation.
Options
Discrete Input 2 (3.4.2.2.)
Disables simulation of Discrete Input 2, or sets behaviour of DI during simulation.
Options
9.3.4.3

Pump Activations (3.4.3.)

Sets how physical relays (that are assigned to pumps) will behave in simulation mode.
Options
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
*
SLOW
* MEDIUM
FAST
* DISABLED
ON
OFF
* DISABLED
ON
OFF
* DISABLED
ENABLED
1% of span
2% of span
4% of span
DI is not simulated
DI is simulated to be ON
DI is simulated to be OFF
DI is not simulated
DI is simulated to be ON
DI is simulated to be OFF
Pump relays are not activated in simulation
Pump relays are activated in simulation
DISABLED
ENABLED
per second
1
per second
1
per second
1
259