Application Examples; Change History; Sensor Node; Lui - Siemens SITRANS LUT400 Operating Instructions Manual

Introduction

1.2 Change History

1.1.2

Application examples

The application examples used in this manual illustrate typical installations using SITRANS
LUT400. As there is often a range of ways to approach an application, other configurations
may also apply.
In all examples, substitute your own application details. If the examples do not apply to your
application, check the applicable parameter reference for the available options.
1.2 Change History
1.2.1

Sensor node

Firmware
1.00.00
1.00.01
1.01.00
1.01.01
1.02.00
1.2.2

LUI

Firmware Rev. Date
1.00.00
1.01.00
1.01.01
1.02.00
14
PDM EDD
Rev. Rev.
1.00.00
1.00.01
1.01.00
1.01.01
1.02.00
August 3, 2012
June 1, 2013
February 1, 2014
December 1, 2014
Date
August 3, • Initial release.
2012
October 1, • Totalizers values are maintained over a power loss.
2012
• Alarms now trip at or beyond setpoints, instead of just
beyond.
• Alarm log files now contain values in user-selected
units. Those units are also logged into files.
• OCM Totalizer values that appear in data log files
now in flow units.
June 1, 2013 • Added 'mega-gallons per day' flow unit.
February 1, Added Russian, Portuguese and Italian language sup-
2014 port.
December 1, • Added user changeable password and First In, First
2014 Out datalog option.
Changes
Initial release
• Level value or level units are now recorded for an in-bounds
level alarm in the alarm log.
• Correction of flow rate on exponential devices using absolute
calculation.
Added Russian, Portuguese and Italian language support.
Added user changeable password and First In, First Out data-
log option.
Changes
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400