Siemens SITRANS LUT400 Operating Instructions Manual page 249

recommend that you use SIMATIC PCS7 Asset Management Software in conjunction with
SIMATIC PDM.
To access these parameters via SIMATIC PDM:
● Open the menu Device – Maintenance and select the Remaining Device Lifetime tab.
(For more details see Maintenance in LUT400Communications manual
Time Units
Allows you to set the desired units.
Options
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01)
1)
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
2)
Lifetime Expected (3.3.3.1.)
Note
The device always operates in years. Changing the Time Units affects only the parameter
view of the Remaining Device Lifetime parameters in SIMATIC PDM, PACTware FDT, and
AMS.
Allows you to override the factory default.
Values
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
1)
Time in Operation (3.3.3.2.)
Read only. The amount of time the device has been operating.
Remaining Lifetime (3.3.3.3.)
Read only. Lifetime Expected (3.3.3.1.) (Page 247) less Time in Operation (3.3.3.2.)
(Page 247).
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
2
*
Units : hours, days, years
1
Range: 0.000 to 20.000 years
Default: 10.000 years
.)
1
HOURS
DAYS
YEARS
247