Loader Revision (3.1.12.); Manufacture Date (Date Of Manufacturing In Pdm) (3.1.13.); Order Option (3.1.14.); Diagnostics (3.2.) - Siemens SITRANS LUT400 Operating Instructions Manual

9.3.1.12

Loader Revision (3.1.12.)

Read only. Corresponds to the software used to update the Field Device.
EDD Version
Read only. Corresponds to the Electronics Device Description (EDD) installed with the
device.
9.3.1.13

Manufacture Date (Date of Manufacturing in PDM) (3.1.13.)

The date of manufacture of the SITRANS LUT400 (YYYY-MM-DD).
9.3.1.14

Order Option (3.1.14.)

Read only. Displays the device type: Standard or NAMUR 43-compliant.
9.3.2

Diagnostics (3.2.)

Note
Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
9.3.2.1

Echo Profile (3.2.1.)

Allows you to request the current echo profile either locally via the local push buttons, or
remotely via SIMATIC PDM.
To request a profile via the local push buttons:
1. In PROGRAM mode, navigate to MAIN MENU > DIAGNOSTICS (3) > ECHO PROFILE
(3.1)
2. Press RIGHT arrow to request a profile.
Note
An Echo Profile (3.2.1.) cannot be requested from LUI when:
• Transducer Enable (3.3.1.) (Page 245) is set to DISABLED, or when
• Transducer (2.1.6.) (Page 170) is set to NO TRANSDUCER. In either case, the local
push button will not operate.
For more detail see Requesting an Echo Profile (Page 78).
For more details on how to interpret an Echo Profile, see Echo Processing (Page 291).
To request a profile via SIMATIC PDM:
1. Open the menu Device – Echo Profile Utilities. (For more details see Echo Profile Utilities
in LUT400 Communications manual
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01)
1)
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
.)
1
241