Notification Pager Functions & Usage - SoftBank Whiz Operational Manual

Whiz Operational Manual
11-1-1 Notification Pager Functions & Usage
■ When the notification pager detects danger upon encountering an obstacle, an alert appears on
the notification pager display (see "P98 11-1-2 Alert Display and its Notification Timing"), and it is
notified with sound and vibration (Fig. 11-2). The sound and vibration last for 15 seconds and pause
for 5 seconds, which is repeated for 10 minutes. When the error is resolved, the alarm sounds for 1
second, and "Standby" (normal) appears on the notification pager display.
■ To receive the alert notification, pair the machine with the notification pager (see "P101 11-3 Pairing
the Notification Pager"). Once the display on the notification pager indicates communication, place it
in the pager compartment to complete pairing.
Start autonomous cleaning
■ During autonomous cleaning, always carry the notification pager on you. Alerts cannot be received
while the notification pager is in the pager holder.
■ The range in which the notification pager can communicate with the machine is a direct line up to
300 m (985 ft) (2 floors above and below).
* Range of communication depends on the environment. Communication may not be possible such
as where there are walls with metal.
■ After using the notification pager, place it in the notification pager charger (see "P103 11-4
Recharging the Notification Pager").
■ If the notification pager won't be used for a long period of time (approx. 2 months) turn the switch
Off (see "P99 11-2 Turning the Notification Pager On/Off")
Fig. 11-2
Object detected
97 / 145
Receive alert notification
Sound ／ Vibration