Carrying Out Autonomous Cleaning (One Route) - SoftBank Whiz Operational Manual

Whiz Operational Manual

9-5 Carrying Out Autonomous Cleaning (One Route)

Select a previously taught cleaning route to start autonomous cleaning (see "P70 9-4-2 Teaching a
Cleaning Route Manually" or "P72 9-4-3 Teaching a Cleaning Route Automatically") and carry out
autonomous cleaning. Before carrying out autonomous cleaning, always inspect the machine (see
"P56 8 Inspection before Operating the Machine").
■ Once the number of saved routes has reached the limit, either delete existing cleaning routes (see
"P91 9-8 Deleting Cleaning Routes"), or scan a different Home Location Code.
■ To allow the notification pager to receive alert messages from the machine, perform pairing with the
notification pager beforehand (see "P95 11 Notification Pager").
■ ON/OFF of the warning sound during the autonomous cleaning can be changed in the SETTINGS
menu of the touch display (see "P48 7-6 Touch Display").
WARNING
The administrator should always carry the notification pager in order to be able
to respond to emergencies during autonomous cleaning. Also, be sure that the
administrator always stays within 300 m (985 ft) of the machine and within two
floors above and below in order to receive alerts from the machine without fail.
* The communication range is within a straight line distance of approximately
300 m (985 ft) and varies depending on the usage environment.
Communication may not be possible such as where there are walls with
metal.
76 / 145