Whiz Operational Manual
6-2-6 Charging the Battery and Installing It to the Machine
1
Charge the battery ( see "P104 12-2 Recharging the Battery").
2
Pull the bottom left of the battery door towards you to open (Fig. 6-27).
■ Remove the accessory box from inside the battery compartment.
3
Insert a fully charged battery as far as it can go (Fig. 6-28).
When the battery is locked in, you will hear a "click" and see the lock pop into place.
■ Hold the grips by both hands, and careful not to drop the battery.
■ Insert the battery in the battery compartment by its terminal end first.
Fig. 6-27
Fig. 6-28
37 / 145