Carrying Out Autonomous Cleaning (Multiples Routes) - SoftBank Whiz Operational Manual

Whiz Operational Manual

9-6 Carrying Out Autonomous Cleaning (Multiples Routes)

Select a previously taught cleaning route to start autonomous cleaning (see P63 "9-4 Teaching a New
Cleaning Route") and carry out autonomous cleaning. Before carrying out autonomous cleaning, always
inspect the machine (see P54 "8-1 Inspection before Operating the Machine").
■ Carry out autonomous cleaning at a time with the fewest number of people passing through and the
least number of objects nearby.
■ To allow the notification pager to receive alert messages from the machine, perform pairing with the
notification pager beforehand (see "P95 11 Notification Pager").
* Pairing is not required at every startup.
■ ON/OFF of the warning sound during the autonomous cleaning can be changed in the SETTINGS
menu of the touch display (see P48 "7-6 Touch Display").
Move the machine to a Home Location Code (see "P59 9-2-1 Locations for Placing Home
1
Location Codes") (Fig. 9-33).
2
On the touch display (see "P48 7-6 Touch Display"), tap "CLEAN" (Fig. 9-34).
Home Location Code scanning screen will be displayed.
Fig. 9-33
Fig. 9-34
81 / 145