Whiz Operational Manual
9-7 Carrying Out Autonomous Cleaning Using Delay Start
After setting the starting time of autonomous cleaning beforehand, autonomous cleaning will start
automatically at the set time.
■ Make sure the machine is fully charged when carrying out autonomous cleaning using Delay Start.
■ Carry out autonomous cleaning as much as possible when there are few people and obstacles in the
cleaning area.
■ The ON/OFF setting of the warning sound during autonomous cleaning can be changed in the
SETTINGS menu of the touch display (see "Touch Display").
Move the machine to a Home Location Code (see "P59 9-2-1 Locations for Placing Home
1
Location Codes") (Fig. 9-43).
2
On the touch display (see "P48 7-6 Touch Display"), tap "CLEAN" (Fig. 9-44).
Home Location Code scanning screen will be displayed.
Fig. 9-43
Fig. 9-44
86 / 145