SoftBank Whiz Quick Manual

Whiz Quick Guide
Introduction
This document contains information on the daily use of the Machine. Please read and understand
the contents of the Whiz Operational Manual before using the Machine. The latest version of this
document and the Whiz Operational Manual can be found on "help.meetwhiz.com".
1.Names of Parts
Front / Side
Top
■ Vacuum Power Button
2.Before Teaching a Cleaning Route
Before teaching a cleaning route to the Machine,
stick the Home Location Code (HLC) at a permanent location
where autonomous cleaning will start / stop (flat against a wall
or a pillar). If the HLC needs to be moved, place it at the same
location whenever the Machine runs autonomously.
Please note that cleaning may not be performed correctly
if the installation of HLC is slightly off.
■ 2D/3D Camera
(Sensor)
■ Dustbin
■ Pager holder
■ LIDAR Sensor
■ Emergency Stop Button
■ Touch Display
■ Steering Handle
■ Max Power Mode Button
■ Autonomous Clean Start / Stop Button
Back
■ HEPA Filter
(Inside the cover)
■ Main Power Switch
■ Battery
(Inside the Battery Compartment)
Bottom
■ Cliff Sensor
■ Brush
■ Hopper Tray
■ Secondary Battery
Power Button
80cm (2.6ft)
2021.01
60cm (2.0ft)
1