Teaching A Cleaning Route Automatically - SoftBank Whiz Operational Manual

Whiz Operational Manual

9-4-3 Teaching a Cleaning Route Automatically

You can create a cleaning route automatically by only training the perimeter of the cleaning area
(within specified limitations).
■ Before teaching a cleaning route, check "P56 8 Inspection before Operating the Machine".
1
Tap "TEACH BOUNDARY" (Fig. 9-19).
Press the Vacuum power button (see "P52 7-7 Vacuum Power Button") (Fig. 9-20).
2
■ Use max power mode (see "P52 7-8 Max Power Mode Button") for especially dirty floors.
■ When teaching a boundary with the Vacuum power off, the entire cleaning area will be cleaned in
normal mode after autonomous cleaning starts.
Fig. 9-19
Fig. 9-20
ON / OFF MAX
72 / 145