Whiz Operational Manual
7-7 Vacuum Power Button
Press the vacuum power button to start vacuuming. Press the button again to stop vacuuming. Pressing
the vacuum power button stops vacuuming in either normal mode or max power mode (Fig. 7-16).
7-8 Max Power Mode Button
Press the max power mode button to change the cleaning mode from normal mode to max power mode.
To clean in max power mode, check that the vacuum power button is on, and press the max power mode
button. Press again to change to normal mode (Fig. 7-17).
■ Use max power mode for especially dirty floors.
■ Max power mode uses up much more battery than normal mode. Consider cleaning time and how
long the battery will be used before using this mode.
■ Either mode can be used in both autonomous cleaning/manual cleaning.
Fig. 7-16
ON / OFF
MAX
Fig. 7-17
ON / OFF
MAX
52 / 145