Steering Handle; Using The Steering Handle - SoftBank Whiz Operational Manual

Whiz Operational Manual

7-9 Steering Handle

Use the steering handle to move and change the direction of the machine during manual cleaning, to
teach a cleaning route, and to transport the machine. Observe the following when using the steering
handle.
■ Check if the steering handle is unstable (not firmly attached).
■ Avoid abruptly turning with the steering handle.
■ Do not lift the machine by the steering handle.
■ The steering handle can be extended to move the machine even when the main power switch is off.
■ Be careful not to pinch your fingers in the steering handle.
■ Stow the steering handle before starting autonomous cleaning.
■ Do not interact with the robot during operation while in autonomous mode.

7-9-1 Using the Steering Handle

Extend the steering handle to move the machine forward and to change directions. To extend the
steering handle, hold with both hands and pull it straight up. Once the joint at the base of the steering
handle is visible, lower the steering handle towards you (Fig. 7-18).
Fig. 7-18
53 / 145