Notification; Autonomous Clean Start/Stop Button - SoftBank Whiz Operational Manual

Whiz Operational Manual
7-10 Notification Pager
If the machine stops operating during autonomous cleaning or the battery becomes low, the notification
pager (see "P95 11 Notification Pager") is alerted by the machine, and the notification pager emits
an alert and vibrates to notify the operator (Fig. 7-20).
Fig. 7-20

7-11 Autonomous Clean Start/Stop Button

Press the autonomous clean start/stop button to start autonomous cleaning mode (see "P57 9
Autonomous Cleaning (Robot)"), pause the machine, or restart cleaning.
■ The autonomous clean start/stop button is used only in autonomous cleaning mode.
Start:
Pressing the autonomous clean start/stop button starts autonomous cleaning (Fig. 7-21)
Fig. 7-21
Pause:
Pressing the autonomous clean start/stop button during autonomous cleaning pauses traveling/
vacuuming of the machine.
The machine pauses traveling/vacuuming, and a message appears on the touch display (see "P48
7-6 Touch Display") indicating the machine is temporarily paused.
Resume:
Pressing the autonomous clean start/stop button unpauses the machine, and autonomous cleaning
resumes.
ON / OFF MAX
55 / 145