Scanning A Home Location Code - SoftBank Whiz Operational Manual

Whiz Operational Manual

9-4-1 Scanning a Home Location Code

Home Location Codes are scanned with the camera on the front of the machine (see "P25 5 Names of
Parts").
■ Move the machine to where the distance between the camera and a Home Location Code is
approximately 80 cm (2.6 ft), and stop the machine so that the Home Location Code and machine are
parallel. If the machine is not positioned properly, it cannot scan the Home Location Code.
■ Once the machine has scanned the Home Location Code, a screen for selecting cleaning routes
appears on the touch display.
1
Pull the steering handle up as far as it will go, and lower it towards you (Fig. 9-6).
2
Move the machine to the Home Location Code where cleaning is to be carried out (see "P59
9-2-1 Locations for Placing Home Location Codes") (Fig. 9-7).
Fig. 9-7
Fig. 9-6
66 / 145