Checking The Hepa Filter - SoftBank Whiz Operational Manual

Whiz Operational Manual

6-2-3 Checking the HEPA Filter

Check that the HEPA filter is properly installed. If the HEPA filter is not properly installed, follow the steps
for installing the filter (see "P114 13-1-2 HEPA Filters").
1
Place your fingers in the holes of the filter cover and turn to the left to remove (Fig. 6-16).
2
Check that the HEPA filter is properly installed (Fig. 6-17).
3
Attach the filter cover to the machine, and turn to the right until it clicks to close.
4
Check the other HEPA filter with the same procedure.
Fig. 6-16
Fig. 6-17
32 / 145