SoftBank Whiz Operational Manual page 72

Whiz Operational Manual
3
Use the steering handle to move the machine, and clean the entire cleaning route (teaching
route) (Fig. 9-17).
■ Changing between normal mode and max power mode (see "P52 7-8 Max Power Mode Button") is
also learned in a cleaning route.
■ Teaching a cleaning route with few detours allows the machine to travel with fewer decreases
in speed for more efficient cleaning.
■ The speed at which the machine travels as you are cleaning along the cleaning route (teaching route)
has no effect on automatic travel. Clean at your own pace, stopping to check the cleaning route, etc.
as needed.
■ Be sure to move the machine forward. Backward movement is not learned in a cleaning route.
■ Do not lift the machine up from the floor while teaching a cleaning route.
■ Do not abruptly stop other than for an emergency. Suddenly turning the machine or changing
directions while teaching a cleaning route may affect teaching of the cleaning route. Make sure
the machine travels in as straight a direction as possible.
■ To cancel cleaning route teaching, pause the machine, and on the touch display, tap "CANCEL
ROUTE"→"YES - CANCEL".
Fig. 9-17
4
Press the Vacuum power button (Fig. 9-18 ).
Cleaning mode will turn off.
Fig. 9-18
ON / OFF MAX
71 / 145