SoftBank Whiz Operational Manual page 135

Whiz Operational Manual
Alert message Cause
PAGER CONNECTION
ERROR
SECONDARY
BATTERY
CHARGING ERROR
619 SYSTEM ERROR
700 COMMUNICATION
ERROR
701 COMMUNICATION
ERROR
BOTTOM SENSOR
ERROR
FRONT CAMERA
ERROR
8100 SYSTEM ERROR LIDAR connection error.
134 / 145
Action
1. Bring pager back to the machine.
2. Press and hold the main button on the
pager for 6 seconds.
3. Dock the pager and reboot the
machine.
If connection fails, please contact
customer service.
1. Disconnect and reconnect the
secondary battery.
2. If the problem continues, please
contact customer support
(cc@icerobo.com) .
ROCD connection error.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.
1. Inspect and clean the bottom sensor.
2. Reboot the machine.
If the problem persists, contact customer
service.
1. Inspect and clean the sensors.
2. Reboot the machine.
If the problem persists, contact customer
service.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.