SoftBank Whiz Operational Manual page 134

Whiz Operational Manual
Alert message Cause
BATTERY IS TOO LOW Inspect and change the battery.
DUSTBAG FULL
SECONDARY
BATTERY OFF
SECONDARY
BATTERY LOW
610: 0 FIRMWARE
ERROR
DUSTBAG SENSOR
ERROR
MACHINE BACKUP
ERROR
MACHINE IS
RUNNNING TOO HOT
133 / 145
Action
Inspect and replace the dustbag.
Do NOT remove the main battery.
Turn on the secondary battery, using the
switch at the bottom of the machine.
Do NOT remove the main battery, unless
the machine is powered off.
Robot encountered a fatal firmware fault.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.
Please contact customer service.
1. Please inspect the machine's
environment and remove any obstacles.
2. Press the blue button to resume.
1. Please wait 15 minutes to let the
temperature decrease.
2. Press the blue button to resume.