Machine Battery; Recharging The Machine's Battery; About Battery And Recharging; Recharging The Battery - SoftBank Whiz Operational Manual

Whiz Operational Manual
12 Machine Battery; Recharging the Machine's
Battery

12-1 About Battery and Recharging

■ The battery operates for about 3 hours when cleaning in normal mode.
■ About 4 hours are required for the battery to fully recharge.
■ Use only batteries designed for the machine.
■ Use only a power cable that came with the machine and is intended for use in your country. Do not
use any other power cable.

12-2 Recharging the Battery

Before using the machine, set the main power switch on the machine off, remove the battery, and
recharge the battery in the battery charger.
When replacing the battery during autonomous cleaning, turn the secondary battery power button (see
"P44 7-4 Secondary Battery Power Button") on. After the battery is replaced, turn the Secondary
battery power button off.
CAUTION
1
Connect the power cable for the battery charger to the battery charger, and connect the
power plug to an outlet (Fig. 12-1).
2
Press the main power switch (I/O) to set it off (O) (Fig. 12-2).
As a safety precaution, always use both hands when removing/installing the
battery or inserting/removing it from the battery charger. Doing so with only
one hand may allow it to drop, which is very dangerous.
Fig. 12-1
Fig. 12-2
104 / 145