SoftBank Whiz Operational Manual page 137

Whiz Operational Manual
Alert message Cause
SAVE ERROR
SAVE ERROR
SAVE ERROR
SAVE ERROR
30000
COMMUNICATION
ERROR
30001
COMMUNICATION
ERROR
AUTONOMY
DISABLED
WRONG HOME CODE This Home Code is No.2.
136 / 145
Action
Make sure to not pull the robot backwards
more than 20 cm at a time while teaching
a route.
1. Seonsor error. Clean the bottom sensor.
2. Reboot the machine. If the problem
persists, contact customer service.
Return home to restart teaching a route.
1. Failed to save route. Please reboot the
machine and retry the route.
2. If the problem persists, contact
customer service.
1. Please reboot the machine.
2. If the problem persists, contact
customer service.
1. Failed to load route data. Please retry.
2. If the problem persists, contact
customer service.
Product RIN:
All functions disabled.
Please contact customer service.
Please return to Home Code No.1, where
you started, to save.