SoftBank Whiz Operational Manual page 146

Whiz Operational Manual
Terminology
T Teach route
Teaching route
Touch display
V Vacuum power
button
W Warning sound
Whiz Connect app
Whiz Connect Portal
Use Home Location Codes to teach cleaning routes in autonomous
cleaning mode. A cleaning route can be taught either automatically
(see "P72 9-4-3 Teaching a Cleaning Route Automatically") or
manually (see "P70 9-4-2 Teaching a Cleaning Route Manually")
Having the machine learn a cleaning route beforehand to use during
autonomous cleaning. (see "P70 9-4-2 Teaching a Cleaning Route
Manually" or "P72 9-4-3 Teaching a Cleaning Route Automatically")
Screen for checking the machine's battery level and operating time,
connection to the Robot Operations Center, error messages, etc.
Cleaning routes are also taught and selected by tapping the touch
display. (see "P48 7-6 Touch Display")
Button for starting/ending vacuuming. (see "P52 7-7 Vacuum Power
Button")
This is the sound played when the autonomous clean start/stop button
(see "P55 7-11 Autonomous Clean Start/Stop Button") is pressed or
the machine changes the direction during the autonomous cleaning.
App for managing current robot operation and alerts.
Portal site allowing management of current robot operation and alerts
as well as downloading of operation reports.
145 / 145
Description