SoftBank Whiz Operational Manual page 85

Whiz Operational Manual
9
Remove the notification pager from the machine.
10
Press the autonomous clean start/stop button (Fig. 9-41).
Autonomous cleaning begins.
■ Remove the notification pager (see "P95 11 Notification Pager") from the machine and carry it with
you.
■ During autonomous cleaning, the LED light indicating the direction the machine is moving in flashes
orange 2 times (example: when the machine is going to turn right, the LED light on the right side will
flash).
■ During autonomous cleaning, the machine travels somewhat away from the edges of walls at a certain
distance so as not to scratch walls, etc. Use manual cleaning to clean the edges of walls (see "P93
10 Manual Cleaning").
■ During autonomous cleaning, do not stand in front of the LIDAR sensor.
11 Check that all functions are operating properly.
■ Once autonomous cleaning completes, the machine returns to the Home Location Code, and notification
arrives on the notification pager.
12
The pager will notify you when cleaning is completed.
Fig. 9-41
ON / OFF MAX
84 / 145