SoftBank Whiz Operational Manual page 107

Whiz Operational Manual
6
Hold the handles, pull the battery out (Fig. 12-6).
Be sure to hold the grips with both hands when pulling the battery out.
Fig. 12-6
7
Insert the battery straight into the battery charger all the way (Fig. 12-7).
Recharging starts when the battery is properly inserted in the battery charger.
■ Slide the battery gently into the charging slot. Inserting it from above may damage the charging
terminal.
■ After inserting the battery, check that the terminals on the battery and the battery charger are
connected firmly.
8
After recharging the battery, check that the charging status light is flashing in green (Fig. 12-8).
9
Once the battery is recharged, pull it straight out of the battery charger and then lift it up.
■ Slide the battery out of the charging slot.
■ Be sure to hold the grips with both hands when pulling the battery out.
Fig. 12-7
Fig. 12-8
106 / 145