Recharging The Notification - SoftBank Whiz Operational Manual

Whiz Operational Manual
11-4 Recharging the Notification Pager
If notification pager battery is running low, charge the pager fully before using it.
1
Insert the Micro USB plug to the cable in the terminal on the back of the notification pager
charger.
2
Connect the USB plug to the cable in USB AC adapter, and plug the adapter into an outlet.
The customer must purchase a USB AC adapter themselves.
3
Place the notification pager in its charger (Fig. 11-10).
Fig. 11-10
■ An AC adapter is not included in the product package. The customer must use their own AC
adapter.
■ Press the pager main button, and if the fully charged mark
completed charging.
■ About 2.5 hours are required to fully recharge.
103 / 145
appears on the display, it has