Program Example (At Unicast Mode) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Program example (At unicast mode)

This section describes a program example when "Communication Mode" under "Application Settings" is set to "Unicast".
Master station (station No.0)
Classification
Module label
Label to be defined
8 COMMUNICATION EXAMPLES
80
8.1 RJ71GN11-T2 Communication Example
Label name
GN11_1.bSts_DataLinkError
GN11_1.bnSts_DataLinkError_Station[1]
GN11_1.bnSts_DataLinkError_Station[2]
Define global labels as shown below:
Description
Data link error status of own station
Data link status of each station (station No.1)
Data link status of each station (station No.2)
Device
SB0049
SW00B0.0
SW00B0.1