System - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

System

In this menu you can do the following:
•
change the password used to access the access point's settings
•
restore the factory default settings
•
create a backup of the access point's configuration
• restore the access point's configuration from a previously saved file
•
save the current settings to the non-volatile memory
•
reboot the access point
• change the web-based interface language
•
update the firmware of the access point
•
configure automatic notification on new firmware version
•
enable/disable Wi-Fi connection and configure automatic reboot of the device on a schedule,
and set a schedule for different filter rules
• view the system log; configure sending the system log to a remote host
•
check availability of a host on the Internet through the web-based interface of the access
point
•
trace the route to a host
•
allow or forbid access to the access point via TELNET and SSH
• configure automatic synchronization of the system time or manually configure the date and
time for the access point
• enable the Auto Provision function.
Page 201 of 235
Configuring via Web-based Interface