DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
DDNS
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / DDNS page, you can configure the access point to use one or several DDNS
services.
A DDNS service allows associating a domain name with dynamic IP addresses. In order to use a
service, it is necessary to register a domain name on the web site of your DDNS provider.
To configure needed settings for the access point, click the ADD button (
Figure 126. The page for configuring the access point to use a DDNS service.
Figure 125. The Advanced / DDNS page.
Page 166 of 235
Configuring via Web-based Interface
).