Changing Web-Based Interface Password - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Changing Web-based Interface Password

On this page, you should change the default administrator password. To do this, enter a new
password in the Admin password and Password confirmation fields. You may set any
password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other
characters available in the US keyboard layout.
Figure 53. The page for changing the web-based interface password.
Remember or write down the new password for the administrator account. In case of losing
!
the new password, you can access the settings of the access point only after restoring the
factory default settings via the hardware RESET button. This procedure wipes out all
settings that you have configured for your access point.
Click the NEXT button to continue or click the BACK button to return to the previous page.
On the next page, check all specified settings.
Also you can save a text file with parameters set by the Wizard to your PC. To do this, click the
SAVE CONFIGURATION FILE button and follow the dialog box appeared.
To finish the Wizard, click the APPLY button. The access point will apply settings and reboot.
Click the BACK button to specify other settings.
3 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
3
Page 68 of 235
Configuring via Web-based Interface