D-Link DAP-600P User Manual page 203

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
The following buttons are also available on the page:
Control
Factory
Backup
Restore
Save
Reboot
In the Idle time field specify a period of inactivity (in minutes) after which the access point
completes the session of the interface. By default, the value 5 is specified. Then click the SAVE
button.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Back Panel section, page 14).
Click the button to save the configuration (all settings of the access
point) to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the access point)
located on your PC and upload it.
Click the button to save settings to the non-volatile memory.
The access point saves changed settings automatically. If changed
settings have not been saved automatically, a notification is
displayed in the top right part of the page.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 203 of 235
Configuring via Web-based Interface
Description