Udpxy - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

UDPXY

This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / UDPXY page, you can allow the access point to use the built-in UDPXY
application. The UDPXY application transforms UDP traffic into HTTP traffic. This application
allows devices which cannot receive UDP streams to access stream video.
To enable the application, move the Enable switch to the right.
Upon that the following fields are displayed on the page:
Parameter
Port
Maximum client number
Buffer size for incoming
data
Buffer size for data
transferred to client
WAN interface
Figure 134. The Advanced / UDPXY page.
The port of the access point which the UDPXY application uses.
Maximum number of devices from the access point's LAN which
will be served by the application.
Size of intermediate buffer for received data.
By default, the minimum acceptable value is specified.
Size of intermediate buffer for transmitted data.
By default, the minimum acceptable value is specified.
From the drop-down list, select a WAN connection which will be
used for operation with streaming video.
Page 176 of 235
Configuring via Web-based Interface
Description