D-Link DAP-600P User Manual page 225

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
In the opened window, you can specify the following parameters:
Parameter
MAC address
Name
Mode
After specifying the needed parameters, click the SAVE button.
To edit a rule for filtering, select a relevant line of the table, in the opened window, change the
needed values and click the SAVE button.
To remove a rule for filtering, select the checkbox located to the left of the relevant rule and click
the DELETE button (
After completing the work with rules, click the APPLY button.
The MAC address of a device from the access point's LAN. You can
enter the MAC address of a device connected to the access point's
LAN at the moment. To do this, select the relevant device from the
drop-down list (the field will be filled in automatically).
Enter a name for the rule for easier identification. Optional.
Select an operating mode of the Yandex.DNS service for this rule.
•
Protection off: When this value is selected, the service
provides the DNS server with no restrictions on access to
unsafe web sites.
• Safe: When this value is selected, the service blocks access
to malicious and fraudulent web sites.
• Child: When this value is selected, the service blocks access
to malicious and fraudulent web sites and blocks access to
adult content.
). Also you can remove a rule in the editing window.
Page 225 of 235
Configuring via Web-based Interface
Description