Back Panel - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Back Panel

Port
RESET
LAN
WAN (PoE)
Figure 2. Back panel view.
A button to restore the factory defaults.
To restore the factory defaults, push the button (with the device turned
on), hold it for 10 seconds, and then release the button.
An Ethernet port to connect a computer or network device.
A LAN LED corresponds to the port. The operating modes:
Solid green
Blinking green
No light
A port with PoE support to connect
line, or a cable or DSL
the LAN port.
An INTERNET LED corresponds to the port. The operating modes:
Solid green
Blinking green
No light
Page 14 of 235
Description
A device (computer) is connected to the port,
the connection is on.
Data transfer through the LAN port.
The cable is not connected to the port.
to a switch, a private Ethernet
modem. In the access point mode, it is used as
The cable is connected to the port.
Data transfer through the WAN port.
The cable is not connected.
Overview