D-Link DAP-600P User Manual page 118

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
In the General Settings section, the following parameters are available:
Parameter
Enable Wireless
Country
Wireless mode
Select channel
automatically
Enable additional
channels
Channel
Enable periodic
scanning
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
To enable/disable Wi-Fi connection on a schedule, click the Set
schedule button (
new schedule (see the
existing one. Existing schedules are displayed in the Interval of
execution drop-down list in the simplified mode.
To enable Wi-Fi connection at the time specified in the schedule and
disable it at the other time, select the Enable value from the Action
for rule upon activation of schedule drop-down list and click
the SAVE button.
To disable Wi-Fi connection at the time specified in the schedule and
enable it at the other time, select the Disable value from the
Action for rule upon activation of schedule drop-down list
and click the SAVE button.
To change or delete the schedule, click the Set schedule button
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
The country you are in. Select a value from the drop-down list.
Operating mode of the wireless network of the access point. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Move the switch to the right to let the access point itself choose the
channel with the least interference.
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels (the
12th and 13th – in the 2.4 GHz band, the 100th and higher – in the 5
GHz band), move the switch to the right.
The wireless channel number. Left-click to open the window for
selecting a channel (the action is available, when the Select
channel automatically switch is moved to the left).
Move the switch to the right to let the access point search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Page 118 of 235
Configuring via Web-based Interface
Description
). In the opened window, you can create a
Schedule section, page 207) or use the