D-Link DAP-600P User Manual page 88

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
If needed, you can add your own address resource records. To do this, click the ADD button (
in the Hosts section (available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard).
Figure 74. Configuring the local interface. The IPv6 tab. The window for adding a DNS record.
In the IP address field, specify a host from the internal or external network. You can choose a
device connected to the access point's LAN at the moment. To do this, select the relevant IPv6
address from the drop-down list (the field will be filled in automatically). In the Name field,
specify the domain name to which the specified IPv6 address will correspond. Click the SAVE
button.
To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened
window, change the needed parameters and click the SAVE button.
To remove a record, in the Hosts section, select the checkbox located to the left of the relevant line
in the table and click the DELETE button (
After completing the work with records, click the APPLY button.
).
Page 88 of 235
Configuring via Web-based Interface
)