D-Link DAP-600P User Manual page 196

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
NAT Loopback
Remote IP
Public port
Private IP
Private port
Click the APPLY button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened page,
change the needed parameters and click the APPLY button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
Move the switch to the right in order to let the users of the access
point's LAN access the local server using the external IP address of
the access point or its DDNS name (if a DDNS service is
configured). Users from the external network access the access point
using the same address (or DDNS name).
Public Network Settings
The IP address of the host/subnet of the client that will connect to
the virtual server.
To add one more IP address, click the ADD REMOTE IP button and
enter the address in the displayed line.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
A port of the access point from which traffic is directed to the IP
address specified in the Private IP field in the Private Network
Settings section. You can specify one port or several ports
separated by a comma.
Private Network Settings
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. You can specify one port or
several ports separated by a comma.
). Also you can remove a server on the editing page.
Page 196 of 235
Configuring via Web-based Interface
Description