D-Link DAP-600P User Manual page 116

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
Check interval
Timeout check
Number of checks
Test hosts
When all needed settings are configured, click the APPLY button.
A time period (in seconds) between regular checks of the main
connection status. By default, the value 30 is specified. The value of
this field should not be higher than product of Timeout check and
Number of checks fields values.
Several attempts are sent to check the status. After a successful
attempt the access point keeps using the main connection. After
several failed attempts a reserve connection is enabled.
A time period (in milliseconds) for one attempt to check the status of
the main connection. By default, the value 1000 is specified.
A number of failed attempts to check the status of the main
connection after which a reserve connection is enabled.
An IP address that the access point will check for availability via
ICMP ping mechanism.
Click the ADD HOST button, and in the line displayed, enter an IP
address or leave values suggested by the access point.
To remove an IP address from the list, click the Delete icon ( ) in
the line of the address.
Page 116 of 235
Configuring via Web-based Interface
Description