D-Link DAP-600P User Manual page 114

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Figure 97. The page for creating a new
Parameter
NAT
RIP
RIPng
Ping
When all needed settings are configured, click the APPLY button.
PPPoE IPv6
Miscellaneous
For the PPPoE Dual Stack type only.
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
For the PPPoE Dual Stack type only.
Move the switch to the right to allow using RIP for this connection.
Move the switch to the right to allow using RIPng for this
connection.
If the switch is moved to the right, the access point responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Page 114 of 235
Configuring via Web-based Interface
connection. The Miscellaneous section.
Description