D-Link DAP-600P User Manual page 43

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
The Device Information section displays the model and hardware version of the access point, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the Device mode
line. In the opened window, click the initial setup wizard link (for the detailed description of the
Wizard, see the Initial Configuration Wizard section, page 47).
The Wi-Fi 2.4 GHz and Wi-Fi 5 GHz sections display data on the state of the device's wireless
network, its name and the authentication type, and availability of an additional wireless network in
the relevant band.
In the WAN section, data on the type and status of the existing WAN connection are displayed.
In the LAN section, the IPv4 address of the access point, the LAN MAC address, and the number of
wired and wireless clients of the device are displayed.
The LAN Ports section displays the state of the device's LAN port and its data transfer mode.
The Yandex.DNS section displays the Yandex.DNS service state and operation mode. To enable
the Yandex.DNS service, move the Enable switch to the right. If needed, change the operation
mode of the service.
Page 43 of 235
Installation and Connection