Vlan - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

VLAN

This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN),
e.g., for distinguishing traffic or specifying additional WAN interfaces.
By default, 2 VLANs are created in the access point's system:
•
LAN: for the LAN interface, it includes the LAN port and Wi-Fi networks. You cannot
delete this VLAN.
•
WAN: for the WAN interface; it includes the WAN (PoE) port. You can edit or delete this
VLAN.
In order to add untagged available Wi-Fi networks or the untagged LAN port to an existing or new
VLAN, first you need to exclude them from the LAN network on this page. To do this, select the
LAN line. On the opened page, from the Type drop-down list of the element corresponding to the
relevant LAN port or Wi-Fi network, select the Excluded value and click the APPLY button.
!
Configuration of the LAN port is available only via Wi-Fi connection to DAP-600P .
Figure 121. The Advanced / VLAN page.
Page 159 of 235
Configuring via Web-based Interface