D-Link DAP-600P User Manual page 172

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
On
Interval
Get URL address via
DHCP
URL address
Username
Password
Username
Password
Request port
Request path
When you have configured the parameters, click the APPLY button.
Inform Settings
Move the switch to the right so the access point may send reports
(data on the device and network statistics) to the ACS.
Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
If the switch is moved to the right, the access point obtains the URL
address of the ACS upon establishing the Dynamic IP type
connection.
If you need to specify the URL address manually, move the switch
to the left and enter the needed value in the URL address field.
The URL address of the ACS provided by the ISP.
The username to connect to the ACS.
The password to connect to the ACS.
display the entered password.
Connection Request Settings
The username used by the ACS to transfer a connection request to
the access point.
The password used by the ACS.
display the entered password.
The port used by the ACS. By default, the port 8999 is specified.
The path used by the ACS.
Page 172 of 235
Configuring via Web-based Interface
Description
Click the Show icon (
Click the Show icon (
) to
) to