Hide thumbs Also See for DAP-2553:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DAP-2553

  • Page 2: System Requirements

    Note: Using a power supply with a different voltage than the one included with the DAP-2553 may damage the unit and will void the warranty for this product. If any of the above items are missing, please contact your reseller.
  • Page 3 Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-2553 and the other end of the cable to a switch. Note: You can also connect the DAP-2553 directly to the computer that will be used for configuration.
  • Page 4: Getting Started

    4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-2553 Quick Install Guide...
  • Page 5: Connecting Poe (Power Over Ethernet)

    Connect one end of an Ethernet cable (included with your package) to the LAN port on the DAP-2553 and the other end of the Ethernet cable to your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP.
  • Page 6: Using The Configuration Menu

    Then, refer to the manual for configuration. Note: If you have changed the default IP address assigned to the DAP-2553, make sure to enter the correct IP address. • Type admin in the User Name field. • Leave the Password field blank.
  • Page 7 Notes...
  • Page 8: Technical Support

    Copyright ©2016 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and AirPremier® are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only.

Table of Contents