Before You Begin
This installation guide provides instructions
for installing the DAP-2695 on your network.
Additional documentation is also available on
the D-Link support website.
•
Nuclias Connect Manual: For additional
information and instructions on how
to configure the device using Nuclias
Connect.
•
DAP-2695 User Manual: For additional
information and instructions on how to
configure the device using the web user
interface.
Package Contents
This DAP-2695 package includes the following
items:
•
DAP-2695 Access Point
•
Six Detachable Antennas
•
Power Adapter (Optional)
•
Mounting Plate and Hardware
•
Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: Using a power supply with a different
voltage than the one included with the
DAP-2695 will cause damage and void the
warranty for this product.
System Requirements
•
Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
DAP-2695 Quick Installation Guide
•
Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration)
Hardware Overview
LED Indicators
1
2
3
Figure 1: Front Panel LED
#
LED
When lit, the access point is
1
2.4 GHz
operating at 2.4 GHz. This light will
blink when there is wireless traffic.
When lit, the access point is
2
5 GHz
operating at 5 GHz. This light will
blink when there is wireless traffic.
Solid light when the Ethernet
port is connected to a power over
LAN1
3
Ethernet (PoE) port, such as a router
(PoE)
or switch. The light will blink when
there is traffic through LAN port.
Solid light when the Ethernet port
is connected to a working port,
4
LAN2
such as a router or switch. The
light will blink when there is traffic
through LAN port.
The light will blink during boot
5
POWER
up. Once solid, the access point
is ready.
Table 1: LED Description
4
5
Description
1