Statistics; Network Statistics - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Statistics

The pages of this section display data on the current state of the access point:
•

network statistics

•
IP addresses leased by the DHCP server
•
data on devices connected to the access point's network and its web-based interface, and
information on current sessions of these devices
•
statistics for traffic passing through ports of the access point
•
addresses of active multicast groups
• the routing table.
Network Statistics
On the Statistics / Network Statistics page, you can view statistics for all connections existing
in the system (WAN connections, LAN, WLAN). For each connection the following data are
displayed: name and state (when the connection is on, its name is highlighted in green, when the
connection is off, its name is highlighted in red), IP address and subnet mask, and volume of data
received and transmitted (with increase of the volume the units of measurement are changed
automatically: byte, Kbyte, Mbyte, Gbyte).
To view detailed data on a connection, click the line corresponding to this connection.
Figure 58. The Statistics / Network Statistics page.
Page 73 of 235
Configuring via Web-based Interface