D-Link DAP-600P User Manual page 164

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the Users section, click the ADD button
( ).
In the opened window, specify the needed parameters:
Parameter
Name
Authentication protocol
Authentication
password
Encryption protocol
Encryption key
MIB subtree
Figure 124. The window for adding a user.
Specify a username for access from the SNMP manager.
Select a required authentication method from the drop-down list or
leave the None value if authentication is not required.
Specify a password for user authentication from the SNMP manager.
The field is displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Select a required encryption method from the drop-down list or
leave the None value if encryption is not required. The list is
displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the DES or AES
value is selected from the Encryption protocol drop-down list.
Specify a MIB element which will be available to the SNMP
manager.
Page 164 of 235
Configuring via Web-based Interface
Description