Url Filter - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

URL Filter

On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.
To enable the URL filter, move the Enable switch to the right, then select a mode from the
Address filtering drop-down list:
•
Block listed URLs: When this value is selected, the access point blocks access to all web
sites specified in the Addresses section;
•
Block all URLs except listed: When this value is selected, the access point allows
access to web sites specified in the Addresses section and blocks access to all other web
sites.
Figure 147. The Firewall / URL Filter page.
Page 198 of 235
Configuring via Web-based Interface