Mesh Network Main Device (Master) - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Mesh Network Main Device (Master)

In order to configure DAP-600P as a main device of your Mesh network, from the Connection
method list, select the Super Mesh value. Then from the Device Role list, select the Master
value. From the Frequency band list, select the band where your Mesh network operates.
!
The Super Mesh function cannot operate in both bands simultaneously. Select one of the
bands ( 2.4GHz or 5GHz ) for all devices of the configured network.
In order to connect your main device to a wired ISP, from the Work mode list, select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, and set your own password for access to the web-based
interface of the device.
Figure 40. Configuring the Super Mesh function for a main device. The Router mode.
Page 53 of 235
Configuring via Web-based Interface