DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Roaming
On the Wi-Fi / Roaming page, you can enable the function of smart adjustment of Wi-Fi clients.
This function is designed for wireless networks based on several access points or routers. If the
function is enabled for all access points (routers) which establish a wireless network, then wireless
clients will always connect to the device with the highest signal level.
To enable the function, click the ENABLE button. Upon that the following settings are available on
the page.
Parameter
Port
Figure 115. The Wi-Fi / Roaming page.
The number of the port used for data exchange between access
points (routers).
Page 149 of 235
Configuring via Web-based Interface
Description