D-Link DAP-600P User Manual page 102

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
MTU
Authentication
protocol
Encryption protocol
Keep Alive
Dial on demand
Extra options
Static IP address
PPP debug
The maximum size of units transmitted by the interface.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Select a method of MPPE encryption.
• No encryption: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit
key is applied.
•
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
• MPPE 128 bit: MPPE encryption with a 128-bit key is
applied.
MPPE encryption can be applied only if the MS-CHAP or MS-
CHAPV2 value is selected from the Authentication protocol
drop-down list.
Move the switch to the right if you want the
you connected to your ISP even when the connection has been
inactive for a specified period of time. If the switch is moved to the
right, the LCP interval and LCP fails fields are available. Specify
the required values.
Move the switch to the right if you want the access point to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Fill in the field if you want to use a static IP address to access the
Internet.
Move the switch to the right if you want to log all data on PPP
connection debugging.
Page 102 of 235
Configuring via Web-based Interface
Description
access point to keep